Tip: How to remove the product left in the mold from
1、Use brass sheet to squeeze into the gap between the product and the mold and pry the product out of the mold cavity, but use …
Tip: How to remove the product left in the mold from Read More »
Blog
1、Use brass sheet to squeeze into the gap between the product and the mold and pry the product out of the mold cavity, but use …
Tip: How to remove the product left in the mold from Read More »
Injection Molds An injection mold is a tool for producing plastic products; it is also the tool that gives plastic products their complete structure and …
Features of the exhaust slot design for injection molds! Read More »
These sudden accidents have made the companies that were not well-off in profits even worse. Enterprises must find ways to reduce costs. I recommend cost …
6 best ways how to reduce the cost of metal parts Read More »
To ensure that the injection mold can produce qualified products, put into production normally, ensure the mold production life and meet the production use requirements …
1、The First Inspection, Record And Mark. 1.1 In the process of injection molding production, operators must do a good job of self-inspection records, test the …
Quality control process in injection molding plant Read More »
1、brittle defects performance Embrittlement refers to the easy cracking or fracture of the part in some parts. Brittle is mainly due to the degradation of …
Analysis of dimensional control from mold design to product end
Cold stamping die process is a metal processing method, which is mainly for metal materials, forcing the materials to deform or separate through the press …
Due to the high light transmittance of transparent plastics, the surface quality of plastic products must be strictly required, and there should be no markings, …
Mold injection molding is a processing method used in mass production of some complex shapes. The specific principle refers to: the heated and melted …
7 examples to tell you thoroughly what is an injection mold? Read More »
Personally, I think you first need to find out from the marketing people how many orders are expected for the new product? Is it huge? …
How can you effectively reduce the cost of purchasing moulds? Read More »
According to reports, the global temperature will rise to 60°C in 2030. Ordinary plastics are still treated by incineration and cremation, causing a large amount …
How to protect our device and protect our planet Read More »